Myers® MG200 Series 2 HP Grinder Pumps
(6)For Residential and Pressure Sewer Applications
The MG200 Series Are 2 HP submersible Grinder Pumps designed to be rugged And economical for Residential and Pressure Sewage applications. Long discharge runs or high static heads are not a problem. The MG200 Series feature a patented cutter mechanism and recessed impeller design to effectively macerate typical domestic sewage solids into a fine slurry.
Myers offers a complete turn-key system for simple selection and installation. No complicated control panel is required. For years of trouble-free service go with the leader in grinder pump technology.
Advantages By Design
Ideal For Use In Pressure Sewer Systems
- Choice of standard, high head or high flow designs.
- Recessed impeller provides steep non-overloading operating curve.
Durable Motor Will Deliver Many Years Of Reliable Service.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- Recessed impeller reduces radial bearing loads, increases bearing life.
- High torque capacitor starts single phase motor for assured starting under heavy load. No external capacitor needed.
- Heavy duty, 2 hp listed, wide angle float switch.
- On-winding current and temperature sensitive overload.
The MG200 Series Is Designed For Easy Maintenance.
- Shredding ring and grinder impeller are replaceable without dismantling pump or motor.
Myers® WGL20 Series 2 HP Grinder Pumps
(26)For Residential, Commercial and Industrial Applications
The Myers WGL20 Series are versatile 2 HP Submersible Grinder Pumps designed specifically for use in Pressure Sewer Applications with long discharge runs or high static heads.It features a patented cutter mechanism and recessed impeller design to effectively macerate typical domestic sewage solids into a fine slurry.
The WGL20 Series can be installed in a variety of packaged systems. Factory-assembled simplex or duplex packages with guide rail systems or suspended systems are available. Myers also has complete turnkey systems to make selection simple. Individual rail components are also available for installation in on-site concrete systems. Myers offers a complete line of submersible sump, sewage, effluent, grinder, non-clog wastewater pumps, controls, basins, and accessories.
Advantages By Design
Ideal for use in Pressure Sewer Systems.
- Choice of standard, high head or high flow designs.
- Recessed impeller provides steep non-overloading operating curve.
Durable Motor will deliver many Years of Reliable Service.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- Recessed impeller reduces radial bearing loads, increases bearing life.
- High torque capacitor start/run single phase or three phase motors for assured starting under heavy load.
- Optional seal leak probe warns of seal leak condition, helps prevent costly motor damage.
- Single phase motors have on-winding current and temperature sensitive overload.
The WGL20 Series is designed for easy maintenance.
- Shredding ring and grinder impeller are replaceable without dismantling pump or motor.
Myers® WG20/WGX20 Series Submersible Grinder Pumps
(24)Standard and Explosion-proof
The Myers WG/WGX20 Series are rugged 2 horsepower Submersible Centrifugal Grinder Pumps designed for Residential, light Commercial or Industrial Applications.It is especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The WG/WGX20 Series features a patented cutter mechanism and recessed impeller design to efficiently grind typical domestic sewage solids into a fine slurry. These pumps are available in standard and U.L. Listed explosion-proof construction for use in Class 1, Group D hazardous locations.
The WG/WGX20 Series can be installed in a variety of packaged systems. Factory-assembled simplex or duplex packages with guide rail systems or suspended systems are available. Individual rail components are also available for installation in on-site concrete systems. Myers offers a complete line of submersible sump, sewage, effluent, grinder, non-clog wastewater pumps, controls, basins, and accessories.
Advantages by Design
Ideal for use in Pressure Sewer Systems.
- Choice of standard or high flow designs.
- Recessed impeller provides steep non-overloading operating curve.
Durable Motor will deliver many years of Reliable Service.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- Recessed impeller reduces radial bearing loads increases bearing life.
- High torque capacitor start/run single phase or three phase motors for assured starting under heavy load.
- Seal leak probes and on-winding heat sensors warn of seal leak condition, and stop motor if motor overheats.
Helps prevent costly motor damage.
The WG/WGX20 Series is designed for easy maintenance.
- Shredding ring and grinder impeller are replaceable without dismantling pump or motor.
Myers® WG30-50 and WGX30/50 Series Submersible Grinder Pumps
(20)Standard and Explosion-proof
The Myers WG30-50 are rugged 3-5 horsepower submersible centrifugal grinder pumps designed for residential, light commercial, industrial or municipal applications. They are especially designed for grinder pump applications requiring higher flows at low to moderate heads. The WG30-50 feature a heavy-duty cutter mechanism and recessed impeller design to efficiently grind typical sewage solids into a fine slurry.
WG30-50 grinder pumps are available in standard and U.L. Listed explosion-proof (WGX30-50) construction for use in Class 1, Group D hazardous locations.
WG30-50 grinder pumps can be installed in a variety of packaged systems. Factory-assembled simplex or duplex packages with guide rail systems are available. Individual rail components are also available for installation in on-site concrete systems. F E. Myers offers a complete line of submersible sump, sewage effluent, grinder, non-clog wastewater pumps, controls, basins and accessories.
Advantages by Design
Ideal for use in Lift Stations
- Recessed impeller provides steep non-overloading operating curve.
Durable Motor will deliver many years of Reliable Service.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- Recessed impeller reduces radial bearing loads increases bearing life.
- High torque capacitor start/run single phase or three phase motors for assured starting under heavy load.
- Seal leak probes and on-winding heat sensors warn of seal leak condition, and stop motor if motor overheats.
Helps prevent costly motor damage.
The WG30-50 Series is designed for easy maintenance.
- Shredding ring and grinder impeller are replaceable without dismantling pump or motor.
Myers® WG30H-75H and WGX30H-75H Series High Head Submersible Grinder Pumps
(28)Standard (WG30H-75H) and Explosion-proof (WGX30H-75H)
Myers WG30H-75H are rugged 3-7 1/2 horsepower Submersible Centrifugal Grinder Pumps designed for Residential, Commercial or Industrial applications. They are especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The WG30H-75H feature a heavy duty cutter mechanism and recessed impeller design to efficiently grind typical sewage solids into a fine slurry
The WG30H-75H grinder pumps are available in standard and U.L. Listed explosion-proof (WGX30H-75H), construction for use in Class 1, Group D hazardous locations.
WG30H-75H grinder pumps can be installed in a variety of packaged systems. Factory-assembled simplex or duplex packages with guide rail systems are available. Individual rail components are also available for installation in onsite concrete systems. F E. Myers offers a complete line of submersible sump, sewage, effluent, grinder, non-clog wastewater pumps, controls, basins and accessories.
Advantages by Design
Ideal for use in Pressure Sewer Systems.
- Recessed impeller provides steep non-overloading operating curve.
Durable Motor will deliver many years of Reliable Service.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- Recessed impeller reduces radial bearing loads increases bearing life.
- High torque capacitor start/run single phase or three phase motors for assured starting under heavy load.
- Seal leak probes and on-winding heat sensors warn of seal leak condition, and stop motor if motor overheats.
Helps prevent costly motor damage.
The WG30H-75H Series is designed for easy maintenance.
- Shredding ring and grinder impeller are replaceable without dismantling pump or motor.
Myers® WG(X)75HH/100H/150H Series High Head Submersible Grinder Pumps
(24)Standard and Explosion-proof
Myers High Head 7 1/2, 10 & 15 horsepower Submersible Centrifugal Grinder Pumps are designed for Municipal, Commercial or Industrial Applications. These pumps are especially suited for use in pressure sewer applications or in systems with long discharge runs or high static heads. The pumps feature a heavy-duty cutter mechanism and recessed impeller designed to efficiently grind typical sewage solids into a fine slurry.
The grinder pumps are available in standard and FM Listed explosion-proof construction for use in Class 1, Groups C & D hazardous locations.
Myers grinder pumps can be installed in a variety of packaged systems. Factory-assembled simplex or duplex packages with guide rail systems are available. Individual rail components are also available for installation in onsite concrete systems. Myers offers a complete line of submersible sump, sewage, effluent, grinder, non-clog wastewater pumps, controls, basins and accessories.
Advantages by Design
Ideal for use in Pressure Sewer Systems.
- Recessed impeller provides steep non-overloading operating curve.
Durable Motor will deliver many years of Reliable Service.
- Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
- Recessed impeller reduces radial bearing loads increases bearing life.
- High torque three phase motors for assured starting under heavy load.
- Seal leak probes and on-winding heat sensors warn of seal leak condition, and stop motor if motor overheats. Helps prevent costly motor damage.
Designed for easy maintenance.
- Shredding ring and grinder impeller are replaceable without dismantling pump or motor.
