| Items |
 /Asset/Untitled-FV13.jpg 8SMDP750M4-43 Standard 8" Submersible Non-Clog Wastewater Pumps |
/Asset/Untitled-FV13.jpg 8SMDP750M4-53 Standard 8" Submersible Non-Clog Wastewater Pumps |
/Asset/Untitled-FV13.jpg 8SMDP1000M4-43 Standard 8" Submersible Non-Clog Wastewater Pumps |
/Asset/Untitled-FV13.jpg 8SMDP1000M4-53 Standard 8" Submersible Non-Clog Wastewater Pumps |
/Asset/Untitled-FV13.jpg 8SMDP1250M4-43 Standard 8" Submersible Non-Clog Wastewater Pumps |
|||||
| Head | 260 ft79 m | |||||||||
| Solids Handling | 3 in76 mm | |||||||||
| Liquids Handling | Drain Water Effluent Raw Unscreened Sewage | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class H) | 356 ºF180 ºC | |||||||||
| Available Motors |
1750RPM 75, 100, 125 HP 460 & 575 volt 3 phase, 60 Hz |
|||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Horizontal Discharge | 8 in203.2 mm | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Cord Cap Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Impeller Material | Ductile Iron, Class 65 ,ASTM A536 | |||||||||
| Power Cord Material | 25 ft. SOOW | |||||||||
| Control Cord Material | 25 ft. SOOW | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic | |||||||||
| Optional Double Tandem Mechanical Seal Material | Lower Tungsten, Carbide | |||||||||
| Pump Shaft Material | 416 SST | |||||||||
| Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Case Wear Ring Materials | Bronze | |||||||||
| Base Elbow Material | Cast Iron, Class 30 ,ASTM A48 | |||||||||
| Speed | 1750 rpm | |||||||||
| Power | 75 hp | 75 hp | 100 hp | 100 hp | 125 hp | |||||
| Voltage | 460 V | 575 V | 460 V | 575 V | 460 V | |||||
| Phase | 3 | |||||||||
| Frequency | 60 Hz | |||||||||
| Start | 540 A430 kV·A | 432 A430 kV·A | 725 A578 kV·A | 580 A578 kV·A | 725 A578 kV·A | |||||
| Run | 101.8 A64.2 kW81.0 kV·A | 81.4 A64.2 kW81.0 kV·A | 129.0 A85.7 kW103.0 kV·A | 103.2 A85.7 kW103.0 kV·A | 165.0 A108.0 kW131.0 kV·A | |||||
| NEC Code Letter | G | |||||||||
| Service Factor | 122.2 A77.0 kW1.2 | 97.8 A77.0 kW1.2 | 155.0 A103.0 kW1.2 | 124.0 A103.0 kW1.2 | 175.0 A115.0 kW1.1 | |||||
| Capacity | 2,320 gpm8,800 lpm | |||||||||
| Agency Approvals1 |
 |
|||||||||
| Note | Consult factory for applications outside of those recommendations. | |||||||||
|
||||||||||
