Capacity : 175 gpm (662 lpm)
Head : 33 ft (10.1 m)

Single and Double Seal

The WHR Series Pumps are designed for use in light Commercial and Residential Raw Sewage Applications. WHR Pumps will Pass a full 2-inch sphere. The recessed vortex impeller provides an unobstructed passage in the volute case which allows these pumps to handle stringy, trashy solids without plugging the impeller. The vortex impeller also greatly extends the pumps bearing life. Available in double seal configuration for extended motor life.

Advantages By Design
Durable Motor

• Oil-filled for cooler operation and constant bearing lubrication.
• Single phase PSC motors have no starting switch to fail.
• Recessed impeller reduces radial bearing loads, increases bearing life.

Non Clog Operation

• Recessed vortex impeller passes 2" solids.
• Impeller operates completely out of volute passage.
• Passes stringy trash and other solids which conventional semi-open impellers can not.

Available With Automatic Piggy-Back Switch for Maintenance-Free Operation

• Piggy-backed mechanical float switch allows pump to operate automatically or can be unplugged for manual operation.

Capacity : 400 gpm (25.24 lpm)
Head : 48 ft (14.6 m)

Horizontal and Vertical Discharge

The 3WHV and V3WHV series non-clog pumps are designed primarily for Commercial applications such as: Schools and Churches, industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, campgrounds, motels, restaurants, office and commercial buildings, state and federal parks, hospitals and nursing homes, dewatering, trailer parks and treatment plants. This pump can be installed on legs (vertical discharge) or with a quick-disconnect slide rail system. Its ability to handle 2:/2-inch spherical solids makes it ideal for most light to medium commercial installations.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane rounded port impellers handle solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service.

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• On winding overload (single phase only) protects motor from over current and heat conditions.

Capacity : 215 gpm (814 lpm)
Head : 70 ft (20.9 m)

Single Seal

The WHR5H-WHR20H Series Pumps are designed for use in light commercial and residential raw sewage and effluent applications. They deliver higher heads than standard sewage pumps and will pass 2 inch solids. Recessed vortex impeller provides an unobstructed passage in the volute case, allowing the pump to handle stringy trash without plugging the impeller.

Advantages By Design
Durable Motor Will Deliver Many Years Of Reliable Service.

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Recessed vortex impeller reduces radial bearing loads, increases bearing life.
• Single phase PSC motors have no starting switch.

Non-Clog Operation

• Recessed vortex impeller passes 2" solids.
• Impeller operates completely out of volute passage
• Passes stringy trash and other solids which conventional semi-open impellers can't.

Capacity : 315 gpm (19.9 lps)
Head : 100 ft (30.4 m)

Standard (3RH) and Explosion-Proof (3RHX) Construction

Myers 3RH and 3RHX (explosion-proof) submersible wastewater pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected.The 3RH/3RHX series provides smooth, vibration-free operation when operating at heads higher than peek efficiency. For use in commercial lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
Passes Stringy Trash, Fibrous Wastes, Slurries, and other difficult to pump Solids that standard enclosed or semi-open Impellers can not.

• Recessed impeller design has completely open passage in volute.
• Pumping action is by Vortex; solids can not get caught in impeller volute.
• Operates without vibration or cavitation over entire performance curve. Operates near shut-off without harming pump.

Durable motor will deliver many years of reliable service.

• Recessed impeller greatly increases bearing life by reducing radial load.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.

Available with optional F.M. approval for use in class 1, Groups C and D hazardous locations (3RHX only)

Capacity : 330 gpm (20.82 lps)
Head : 92 ft (28 m)

Vertical Discharge
2" Solids Handling - 3450 RPM
2 1/2" Solids Handling -1750 RPM

The heavy-duty Myers 3MW series sewage pumps are designed for use in residential raw sewage and light commercial applications. 3MW pumps are available in single and double seal configuration. The enclosed two-vane impeller provides high efficiency pumping and easily handles trashy solids normally found in sewage applications. This series is offered with vertical discharge and easily adapts to a quick-disconnect slide rail system.

Advantages By Design

• High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.
• Two-vaned rounded port impellers easily handle solids at high operating efficiencies.
• Offered in two speeds to cover larger operating range.
• Hydraulic end virtually maintenance free. No close running tolerances have to be maintained or adjusted.
• Volute seal ring replaces in minutes if wear should occur with no adjustments needed.

Durable motor will deliver many years of reliable service

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• High torque, permanent split capacitor (PSC), single phase motors. No starting switches or relays to wear out.
• Optional seal leak probe warns of seal leak condition. (Dual seal motors only.) Helps prevent costly motor damage.
• Motors have on winding current and temperature sensitive overload. (Single phase only.)
• Motor is held in place by 4 bolts. Easily removed if service is ever needed.

Capacity : 400 gpm (25.24 lps)
Head : 48 ft (14.6 m)

Standard (3V) and Explosion-proof (3VX) Construction

Myers 3V and 3VX (explosion-proof) submersible wastewater pumps pass a full 2 1/2" spherical solid and are the ideal choice when selecting a pump for your next application. Myers rounded port, 2-vane, enclosed impeller prevents solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 3V series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for extended seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port enclosed type impeller handles 2 1/2" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable Motor will deliver many years of Reliable Service.

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from over heat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are double sealed with epoxy and compression grommet.

Capacity : 720 gpm (45.5 lps)
Head : 59 ft (17.9 m)

Horizontal and Vertical Discharge

The 4WHV and V4WHV Series Non-clog Pumps are designed primarily for Commercial applications such as: Schools And Churches industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, campgrounds, motels, restaurants, office and commercial buildings, state and federal parks, hospitals and nursing homes, dewatering, trailer parks and treatment plants. This pump can be installed on legs (vertical discharge) or with a quick-disconnect slide rail system. Its ability to handle 3-inch spherical solids makes it ideal for most light to medium commercial installations.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane rounded port impellers handle solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service.

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probe in seal chamber warns of moisture entry; helps prevent costly motor burnout.

Capacity : 565 gpm (35.7 L/s)
Head : 57.5 ft (17.5 m)

Standard (4R) and Explosion-Proof (4RX) Construction

The 4R and 4RX (Explosion-proof) Submersible Wastewater Pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected. the 4R series provides smooth, vibration-free operation when operating at heads higher than peek efficiency. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
Passes stringy trash, fibrous wastes, slurries, and other difficult to pump solids that standard enclosed or semi-open impellers can not.

• Recessed impeller design has completely open passage in volute.
• Pumping action is by vortex; solids can't get caught in impeller volute.
• Operates without vibration or cavitation over entire performance curve. Operates near shut-off without harming pump.

Durable motor will deliver many years of reliable service

• Recessed impeller greatly increases bearing lilt by reducing radial load.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from over heat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.

Available with optional U.L. approval for use in Class 1, group D hazardous locations (4RX only).

Capacity : 715 gpm (45.1 lps)
Head : 59 ft (17.9 m)

Standard (4V) and Explosion-Proof (4VX) Construction

The 4V and 4VX (Explosion-proof) Submersible Wastewater Pumps pass a full 3" spherical solid and are the ideal choice when selecting a pump for your next application. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4V series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impellers handle 3" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service.

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probe in seal chamber warns of moisture entry; helps prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are double sealed with epoxy and compression grommet.

Available with optional UL approval for use in class 1, Group D hazardous locations (4VX only).

Capacity : 900 gpm (56.7 L/s)
Head : 85 ft (25.9 m)

Standard (4VH) and Explosion-Proof (4VHX) Construction

The 4VH and 4VHX (Explosion-proof) Submersible Wastewater Pumps are a heavy-duty 4" non-clog series capable of passing a full 3" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VH series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impellers handle 3" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation and low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are double sealed with epoxy and compression grommet.

Available with optional UL approval for use in Class 1, Group D hazardous locations (4VHX only).

• 4VHX file number E68118.
• Nonsparking rail system file number E76984N.

Capacity : 1800 gpm (113.41 L/s)
Head : 165 ft (50.3 m)

Standard (4VC) and Explosion-Proof (4VCX) Construction

The 4VC and 4VCX (Explosion-proof) Submersible Wastewater Pumps are a heavy-duty 4" non-clog series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VC series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impellers handle 3 3/16" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable Motor Will Deliver Many Years Of Reliable Service

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are triple sealed with epoxy, compression grommet and terminal board.

Available with optional FM approval for use in Class 1, Groups C and D hazardous locations (4VCX only).

Capacity : 1250 gpm (78.8 lps)
Head : 265 ft (80.8 m)

Technical Information

The Right Choice

The 4RC and 4RCX (explosion-proof) submersible wastewater pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected. The 4RC/4RCX series provides smooth, vibration-free operation when operating at heads higher than peak efficiency. The pump is for use in municipal lift stations, treatment plants and industrial waste water applications.

Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Passes stringy trash, fibrous wastes, slurries, and other difficult to pump solids that standard enclosed or semi-open impellers cannot.

• Recessed impeller design has completely open passage in volute.
• Pumping action is by vortex; solids can't get caught in impeller volute.
• Operates without vibration or cavitation over entire performance curve. Operates near shutoff without harming pump.

Durable motor will deliver many years of reliable service.

• Recessed impeller greatly increases bearing life by reducing radial load.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.

Available with optional FM approval for use in Class 1, groups C and D hazardous locations (4RCX only).

Capacity : 730 gpm (2,763 lpm)
Head : 90 ft (27 m)

Standard (4VHS) and Explosion-Proof (4VHSX) Construction

The 4VHS and 4VHSX (Explosion-proof) Submersible Wastewater Pumps are a heavy-duty 4" non-clog series capable of passing a full 3" spherical solid. Myers single vane impeller prevents solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VHS series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Single vane impeller provides a steeper, non-overloading performance curve and handles 3" solids with ease.
• Modified constant velocity volute offers quiet operation, and low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from over heat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burn-out.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are double sealed with epoxy and compression grommet.

Available with optional U.L. approval for use in Class 1, Group D hazardous locations (4VHSX only).

Capacity : 700 gpm (2,650 lpm)
Head : 165 ft (50 m)

Standard (4VE) and Explosion-proof (4VEX) Construction

The 4VE and 4VEX (Explosion-proof) Submersible Wastewater Pumps are a heavy-duty 4" non-clog series capable of passing a full 3" spherical solid. Myers rounded port, single vane, enclosed impeller prevents solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VE series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life and is for use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump.

• Single vane, rounded port, enclosed impeller handles 3" solids with ease at high operating efficiencies.
• Non-clogging design for trouble-free operation.
• Produces high heads.

Durable motor will deliver many years of reliable service.

• Class H insulation.
• Continuous duty/VFD rated.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Internal thermal overload protection.
• Double tandem shaft seals prevent sewage from entering motor.
• Internal seal leak probes warn of moisture entry.
• Triple sealed power and control cables.

Capacity : 450 gpm (28.4 L/s)
Head : 30 ft (39.5 m)

Standard (4RH) and Explosion-Proof (4RHX) Construction
The 4RH and 4RHX (Explosion-proof) Submersible Wastewater Pumps are the right choice when difficult to pump fibrous or stringy solids are to be expected. The 4RH/4RHX series provides smooth, vibration-free operation when operating at heads higher than peak efficiency. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
Passes stringy trash, fibrous wastes, slurries and other difficult to pump solids that standard enclosed or semi-open impellers cannot.

• Recessed impeller design has completely open passage in volute.
• Pumping action is by vortex; solids can't get caught in impeller volute.
• Operates without vibration or cavitation over entire performance curve. Operates near shut-off without harming pump.

Durable motor will deliver many years of reliable service

• Recessed impeller greatly increases bearing life by reducing radial load.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burn-out.

Available with optional FM approval for use in Class 1, Groups C and D hazardous locations (4RHX only).

Capacity : 2,100 gpm (8,000 lpm)
Head : 275 ft (84 m)

Standard (4VL) and Explosion-Proof (4VLX) Construction
The Myers 4VL submersible non-clog Sewage Pumps are designed especially for high flow applications such as: municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenance. The 4VL's ability to handle solids up to 3 inches in diameter make it ideal for most high flow wastewater applications.

Advantages by design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump

• Two-vane, rounded port impeller handles 3" solids with ease at high operating efficiencies.
• Produces high head.

Durable motor will deliver many years of reliable service

• Class H insulation.
• Continuous duty/VFD rated.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Internal thermal overload protection.
• Double tandem shaft seals prevent sewage from entering motor.
• Internal seal leak probes warn of moisture entry.
• Triple sealed power and control cables.

Capacity : 680 gpm (42.9 L/s)
Head : 106 ft (32.3 m)

Standard (4VHA) and Explosion-Proof (4VHAX)

The high head 4VHA and 4VHAX (Explosion-proof) submersible non-clog Wastewater Pumps feature heavy duty construction and high operating efficiencies. Myers rounded port, 2-vane, enclosed impeller prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VHA series constant velocity volute provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in raw water, storm water, effluent and drainage applications. Myers offers a complete line wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impeller operates at high efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service.

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burn-out.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are double sealed with epoxy and compression grommet.

Available with optional U.L. approval for use in Class 1, Group D hazardous location (4VHAX only).

Capacity : 900 gpm (56.7 L/s)
Head : 85 ft (25.9 m)

Standard (6VH) and Explosion-Proof (6VHX) Construction

The 6VH and 6VHX (Explosion-proof) submersible Wastewater Pumps are a heavy-duty 6" non-clog series capable of passing a full 3" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 6VH series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impellers handle 3" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; help prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are triple sealed with epoxy, compression grommet and terminal board.

Available with optional FM approval for use in Class 1, Group C and D hazardous locations (6VHX only).

Capacity : 2,400 gpm (151.2 L/s)
Head : 146 ft (44.5 m)

Standard (6VC) and Explosion-Proof (6VCX) Construction

The 6VC and 6VCX (Explosion-proof) Submersible Wastewater pumps are a heavy-duty 6" non-clog Series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 6VC series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impellers handle 3 3/16" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable Motor Will Deliver Many Years Of Reliable Service.

• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are triple sealed with epoxy, compression grommet and terminal board.

Available with optional FM approval for use in Class 1, Groups C and D hazardous locations (6VCX only).

• Non-sparking rail system available.

Capacity : 3,875 gpm (14,667 lpm)
Head : 170 ft (50.8 m)

Standard (8VL) and Explosion-Proof (8VLX)

The Myers 8VL submersible non-clog Sewage Pumps are designed especially for high flow applications such as: Large Municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenance. The 8VL's ability to handle solids up to 4 inches in diameter and 3 available motor speeds make it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port impellers handle solids with ease at high operating efficiencies.
• Modified, constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service

• Oil-filled motor and seal cavity for maximum heat dissipation and continuous bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry: helps prevent costly motor burn-out.

Capacity : 2320 gpm (8,800 lpm)
Head : 260 ft (79 m)

Standard (8SM) and Explosion-Proof (8SMX) Construction

The Myers 8SM submersible non-clog Sewage Pumps are designed especially for high flow applications such as: large municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenance. The 8SM's ability to handle solids up to 3 inches in diameter make it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump

• Two-vane, rounded port impeller handles 3" solids with ease at high operating efficiencies.
• Produces high heads and flows

Durable motor will deliver many years of reliable service

• Class H insulation.
• Continuous duty/VFD rated.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Internal thermal overload protection.
• Double tandem shaft seals prevent sewage from entering motor.
• Internal seal leak probes warn of moisture entry.
• Triple sealed power and control cables.

Capacity : 7,750 gpm (29,331 lpm)
Head : 72 ft (21.9 m)

Standard (12VL) and Explosion-Proof (12VLX)

The Myers 12VL Submersible non-clog Sewage Pumps are designed especially for high flow, medium head applications such as: Large municipal lift stations, treatment plants, transfer stations and dewatering. A quick removal type rail system is available to simplify installation and maintenance. The 12VL's high pumping efficiencies, ability to handle solids up to 5 1/4 inches in diameter and 2 available motor speeds make it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port impellers handle solids with ease at high operating efficiencies.
• Modified, constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable Motor Will Deliver Many Years Of Reliable Service

• Oil-filled motor and seal cavity for maximum heat dissipation and continuous bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from overheat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burn-out.

Capacity : 2,400 gpm (151.2 lps)
Head : 146 ft (44.5 m)

Submersible Dry Pit

Standard (6VCDP) and Explosion-Proof (6VCXDP)

The 6VCDP and 6VCXDP (explosion-proof) Submersible Dry Pit Wastewater Pumps are a heavy-duty 6" non-clog series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 6VCDP series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal and industrial waste applications. Myers offers a complete line of submersible dry pit wastewater pumps, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impeller handles 3 3/16" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service

• Class H insulation.
• Continuous duty/VFD magnet wire.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from over heat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are triple sealed with epoxy compression grommet and terminal board.

Available with optional F.M. approval for use in Class 1, Groups C and D hazardous locations (6VCXDP only).

Capacity : 1800 gpm (113.4 L/s)
Head : 165 ft (50.3 m)

Submersible Dry Pit

The 4VCDP and 4VCXDP (Explosion-proof) Submersible Dry Pit Wastewater Pumps are a heavy-duty 4" non-clog series capable of passing a full 3 3/16" spherical solid. Myers rounded port, 2-vane, enclosed impellers prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VCDP series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal and industrial waste applications. Myers offers a complete line of submersible dry pit wastewater pumps, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port, enclosed type impeller handles 3 3/16" solids with ease at high operating efficiencies.
• Modified constant velocity volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service

• Class H insulation.
• Continuous duty/VFD magnet wire.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Heat sensor thermostats imbedded in windings protect motor from over heat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burnout.
• Double tandem shaft seals prevent sewage from entering motor.
• Power and control cables are triple sealed with epoxy, compression grommet and terminal board.

Available with optional F.M. approval for use in Class 1, Groups C and D hazardous locations (4VCXDP only).

Capacity : 3875 gpm (14,667 lpm)
Head : 170 ft (51.8 m)

Submersible Dry Pit

Standard (8VLDP) and Explosion-Proof (8VLXDP)

The 8VLDP and 8VLXDP (Explosion-proof) Submersible Dry Pit Wastewater Pumps are designed especially for high flow applications such as: Large Municipal Stations, Treatment Plants, Transfer Stations and Dewatering. The pump handles solids up to 4 inches in diameter with 3 available motor speeds make it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port impeller handles 4" solids with ease at high operating efficiencies.
• High efficiency volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will deliver many years of reliable service

• Class H Insulation.
• Continuous duty/VFD magnet wire.
• Oil-filled motor and seal cavity for maximum heat dissipation and continuous lubrication.
• Heat sensor thermostats imbedded in windings protect motor from over heat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burn-out.

Capacity : 7,750 gpm (29,331 lpm)
Head : 72 ft (21.9 m)

Submersible Dry Pit

Standard (12VLDP) and Explosion-Proof (12VLXDP)

The 12VLDP and 12VLXDP (Explosion-proof) Submersible Dry Pit Wastewater Pumps are designed especially for high flow medium head applications such as: Large Municipal stations, treatment plants, transfer stations and dewatering. The pump handles solids up to 5 1/4 inches in diameter and 2 available motor speeds make it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.

• Two-vane, rounded port impeller handles 5 1/4 solids with ease at high operating efficiencies.
• High efficiency volute offers quiet operation, low radial loads over extended portion of performance curve.

Durable motor will provide many years of reliable service

• Oil-filled motor and seal cavity for maximum heat dissipation and continuous lubrication.
• Heat sensor thermostats imbedded in windings protect motor from over heat conditions.
• Seal leak probes warn of moisture entry; helps prevent costly motor burn-out.

Capacity : 650 gpm (2,500 lpm)
Head : 172 ft (52 m)

Submersible Dry Pit

Standard (4VEDP) and Explosion-proof (4VEXDP)

The 4VEDP and 4VEXDP (Explosion-proof) Submersible Dry Pit Wastewater Pumps are a heavy-duty 4" non-clog series capable of passing a full 3" spherical solid. Myers rounded port, single vane, enclosed impeller prevent solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 4VEDP series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for longer seal and bearing life. For use in municipal treatment plants and industrial waste applications. Myers offers a complete line of submersible dry pit wastewater pumps, controls and accessories to meet your needs.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump.

• Single vane, rounded port, enclosed type impeller handles 3" solids with ease at high operating efficiencies.
• Non-clogging design for trouble-free operation.
• Produces high heads.

Durable motor will deliver many years of reliable service.

• Class H insulation.
• Continuous duty/VFD magnet wire.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Internal overload protection.
• Double tandem shaft seals prevent sewage from entering motor.
• Internal seal leak probes warn of moisture entry.
• Triple sealed power and control cables.

Capacity : 2,100 gpm (8,000 lpm)
Head : 275 ft (84 m)

Submersible Dry Pit

Standard (4VLDP) and Explosion-Proof (4VLXDP)

The Myers 4VLDP Submersible Dry Pit Non-clog Sewage Pumps are designed especially for high flow applications such as: municipal stations, treatment plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump

• Two-vane, rounded port impeller handles 3" solids with ease at high operating efficiencies.
• Produces high head.

Durable motor will deliver many years of reliable service

• Class H insulation.
• Continuous duty/VFD magnet wire.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Internal thermal overload protection.
• Double tandem shaft seals prevent sewage from entering motor.
• Internal seal leak probes warn of moisture entry.
• Triple sealed power and control cables.

Capacity : 2,320 gpm (8,800 lpm)
Head : 260 ft (79 m)

Submersible Dry Pit

Standard (8SM) and Explosion-Proof (8SMX) Construction

The Myers 8SMDP Submersible Dry Pit Non-clog Sewage Pumps are designed especially for high flow applications such as: large municipal stations, treatment plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter make it ideal for most high flow wastewater applications.

Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump

• Two-vane, rounded port impeller handles 3" solids with ease at high operating efficiencies.
• Produces high heads and flows

Durable motor will deliver many years of reliable service

• Class H insulation.
• Continuous duty/VFD magnet wire.
• Oil-filled motor for maximum heat dissipation and constant bearing lubrication.
• Internal thermal overload protection.
• Double tandem shaft seals prevent sewage from entering motor.
• Internal seal leak probes warn of moisture entry.
• Triple sealed power and control cables.