For Residential and Pressure Sewer Applications
The MG200 Series Are 2 HP submersible Grinder Pumps designed to be rugged And economical for Residential and Pressure Sewage applications. Long discharge runs or high static heads are not a problem. The MG200 Series feature a patented cutter mechanism and recessed impeller design to effectively macerate typical domestic sewage solids into a fine slurry
Myers offers a complete turn-key system for simple selection and installation. No complicated control panel is required. For years of trouble-free service go with the leader in grinder pump technology.
Advantages By Design
Ideal For Use In Pressure Sewer Systems
Durable Motor Will Deliver Many Years Of Reliable Service.
The MG200 Series Is Designed For Easy Maintenance.
| Items |
 MG200-21 Myers® MG200 Series 2 HP Grinder Pumps |
MG200-21P Myers® MG200 Series 2 HP Grinder Pumps |
MG200F-21 Myers® MG200 Series 2 HP Grinder Pumps |
MG200F-21P Myers® MG200 Series 2 HP Grinder Pumps |
MGH200-21 Myers® MG200 Series 2 HP Grinder Pumps |
|||||
| Head | 138 ft42 m | |||||||||
| Liquids Handling | Domestic Raw Sewage | |||||||||
| Intermittent Liquid Temperature | up to 140 ºFup to 60 ºC | |||||||||
| Winding Insulation Temperature. (Class F) | 311 ºF155 ºC | |||||||||
| Motor Electrical Data | 1 ph - capacitor start/run. 2 hp 3450 rpm 230 volt; 60 Hz, 15.0 amps | |||||||||
| Acceptable pH Range | 6 to 9 | |||||||||
| Specific Gravity | 0.9 to 1.1 | |||||||||
| Viscosity | 28 to 35 SSU | |||||||||
| Discharge, NPT | 1 1/4 in31.75 mm | |||||||||
| Minimum Sump Diameter (Simplex) | 24 in61 cm | |||||||||
| Minimum Sump Diameter (Duplex) | 36 in91.4 cm | |||||||||
| Motor Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Seal Housing Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Volute Case Material | Cast Iron, Class 30, ASTM A48 | |||||||||
| Power Cord. 20' Material | 14/3SJOW/SJOW-A | |||||||||
| Standard Double Tandem Mechanical Seal Material | Carbon & Ceramic | |||||||||
| Optional Double Tandem Mechanical Seal Material | Tungsten Carbide | |||||||||
| Pump, Motor Shaft Material | 416 SST | |||||||||
| Fasteners Material | 300 series SST | |||||||||
| Shredding Ring Material | 440 SST, 58-60 Rockwell | |||||||||
| Grinder Impeller Material | 440 SST, 58-60 Rockwell | |||||||||
| Recessed Impeller Material | Ductile Iron (MGH) Eng. Thermoplastic (MG/MGF) | |||||||||
| Voltage | 230 V | |||||||||
| Phase | 1 | |||||||||
| Start | 51.9 A11.9 kV·A | |||||||||
| Run | 15.0 A2.9 kW3.5 kV·A | |||||||||
| Capacity | 0 - 45 gpm260 lpm | 0 - 45 gpm260 lpm | 0 - 70 gpm260 lpm | 0 - 70 gpm260 lpm | 0 - 22 gpm260 lpm | |||||
| NEC Code Letter | G | |||||||||
| Service Factor | 1.25 | |||||||||
| Agency Approvals |
  |
|||||||||
| Power | 2 hp | |||||||||
|
|
||||||||||
