Capacity : 2,100 gpm (8,000 lpm)
Head : 275 ft (84 m)
Submersible Dry Pit
Standard (4VLDP) and Explosion-Proof (4VLXDP)
The Myers 4VLDP Submersible Dry Pit Non-clog Sewage Pumps are designed especially for high flow applications such as: municipal stations, treatment plants, transfer stations and dewatering. The ability to handle solids up to 3 inches in diameter makes it ideal for most high flow wastewater applications.
Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends the life of the pump
Durable motor will deliver many years of reliable service
Head |
N/A 275 ft84 m |
Solids Handling |
N/A 3 in76 mm |
Liquids Handling |
N/A Drain Water Effluent Raw Unscreened Sewage |
Intermittent Liquid Temperature |
N/A up to 140 ºFup to 60 ºC |
Winding Insulation Temperature. (Class H) |
N/A 356 ºF180 ºC |
Available Motors |
N/A
1750 RPM 50, 60, 75, 100, 125 HP 460 & 575 volts 3Ø, 60 Hz |
Acceptable pH Range |
N/A 6 to 9 |
Specific Gravity |
N/A 0.9 to 1.1 |
Viscosity |
N/A 28 to 35 SSU |
Horizontal Discharge |
N/A 4 in101.6 mm |
Speed |
N/A 1750 rpm |
Power |
N/A 50 hp |
Voltage |
N/A 575 V |
Phase |
N/A 3 |
Frequency |
N/A 60 Hz |
Start |
N/A 432 A390 kV·A |
Run |
N/A 52 A52.6 kW29.9 kV·A |
NEC Code Letter |
N/A H |
Service Factor |
N/A 59.0 A63.1 kW1.2 |
Capacity |
N/A 2,100 gpm8,000 lpm |
Note |
N/A
Consult factory for applications outside of these recommendations. FM Class 1, Group C & D |
Motor Housing Material |
N/A Cast Iron, Class 30, ASTM A48 |
Seal Housing Material |
N/A Cast Iron, Class 30, ASTM A48 |
Volute Case Material |
N/A Cast Iron, Class 30, ASTM A48 |
Cord Cap Material |
N/A Cast Iron, Class 30, ASTM A48 |
Impeller Material |
N/A Ductile Iron, Class 65, ASTM A536 |
Power Cord Material |
N/A 25 ft. SOOW |
Control Cord Material |
N/A 25 ft. SOOW |
Standard Double Tandem Mechanical Seal Material |
N/A Carbon & Ceramic |
Optional Double Tandem Mechanical Seal Material |
N/A Lower Tungsten, Carbide |
Pump Shaft Material |
N/A 416 SST |
Motor Shaft Material |
N/A 416 SST |
Fasteners Material |
N/A 300 series SST |
Case Wear Ring Materials |
N/A Bronze |
Base Elbow Material |
N/A Cast Iron, Class 30, ASTM A48 |