Capacity : 400 gpm (25.24 lps)
Head : 48 ft (14.6 m)
Standard (3V) and Explosion-proof (3VX) Construction
Myers 3V and 3VX (explosion-proof) submersible wastewater pumps pass a full 2 1/2" spherical solid and are the ideal choice when selecting a pump for your next application. Myers rounded port, 2-vane, enclosed impeller prevents solids from binding or clogging and offer high operating efficiencies to cut your pumping costs. The 3V series modified constant velocity volute case provides smooth operation over an extended portion of the performance curve for extended seal and bearing life. For use in municipal lift stations, treatment plants and industrial waste applications. Myers offers a complete line of wastewater pumps, lift-out rail assemblies, controls and accessories to meet your needs.
Advantages By Design
High efficiency hydraulic design cuts pumping costs and extends life of fluid end components.
Durable Motor will deliver many years of Reliable Service.
Head |
N/A 48 ft14.6 m |
Solids Handling Capacity |
N/A 2 1/2 in63.5 mm |
Liquids Handling |
N/A Effluent Raw Unscreened Sewage Storm Water |
Intermittent Liquid Temperature |
N/A up to 140 ºFup to 60 ºC |
Winding Insulation Temperature. (Class B) |
N/A 311 ºF155 ºC |
Motor Electrical Data |
N/A 1-5 HP, 200/230/460/575V, 3Ø, 60 Hz 1-5 HP. 230V, 1Ø, 60 Hz 1750 RPM |
Acceptable pH Range |
N/A 6 to 9 |
Specific Gravity |
N/A 0.9 to 1.1 |
Viscosity |
N/A 28 to 35 SSU |
Discharge (Flange Dim.) |
N/A 3 in76 mm |
Power |
N/A 3 hp |
Voltage |
N/A 460 V |
Phase |
N/A 3 |
Frequency |
N/A 60 Hz |
Start |
N/A 29 A23.1 kV·A |
Run |
N/A 6 A3.5 kW4.8 kV·A |
NEC Code Letter |
N/A J |
Service Factor |
N/A 7.8 A4.5 kW1.2 |
Capacity |
N/A 400 gpm25.24 lps |
Note |
N/A Consult factory for applications outside of these recommendations |
Motor Housing Material |
N/A Cast Iron, Class 30, ASTM A48 |
Seal Housing Material |
N/A Cast Iron, Class 30, ASTM A48 |
Volute Case Material |
N/A Cast Iron, Class 30, ASTM A48 |
Cord Cap Material |
N/A Cast Iron, Class 30, ASTM A48 |
Enclosed 2-Vane Impeller Material |
N/A Ductile Iron, Class 65, ASTM A536 |
Power Cord Material |
N/A 25 ft. SOOW |
Control Cord Material |
N/A 25 ft. SOOW |
Standard Double Tandem Mechanical Seal Material |
N/A Carbon & Ceramic, Type 21 |
Optional Double Tandem Mechanical Seal Material |
N/A Lower Tungsten, Carbide |
Pump Shaft Material |
N/A 416 SST |
Motor Shaft Material |
N/A 416 SST |
Fasteners Material |
N/A 300 series SST |
Volute Wear Ring Material |
N/A Brass |